4/10/2023 0 Comments Cube pro cartridge weightAn alignment gauge such as the DB Systems DBP-10 (or the one provided by your tonearm manufacturer).A lighted magnifying glass of at least 10X power.Stylus pressure gauge, like the Shure SFG-2.Non-magnetic headshell screws, washers and, possibly, nuts if not provided by the cartridge manufacturer.Here’s a quick summary of the tools you’ll likely need to install your phono cartridge: Even exercising the utmost care and patience during setup, the best we can hope for is a good approximation of the original signal, which, in practice, turns out to be more than sufficient for superb musical results. Of course there are many reasons why correct stylus geometry with respect to the groove is insufficient to guarantee perfect analog signal extraction, the electromagnetic properties of the cartridge’s internal wiring and magnet structure, and the shape of the stylus itself being but two. If the stylus replicates exactly (in three dimensions) the cutter’s path through the record groove, then the signal extracted should be an exact replica of the one deposited in the groove by the cutter. The goal of vinyl playback is to extract, as faithfully as possible, the tiny signal carved into the surface of the record by the record cutting lathe. And while correctly setting up these delicate devices does require relatively vast amounts of both time and patience, the steps involved are well within the scope of the audio enthusiast with a steady hand and the right tools at his disposal. With the near-complete erosion of support for vinyl playback at the retail level , audiophiles devoted to the analog disc have little recourse but to become adept at the finer points of cartridge setup.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |